|
|
TUBULAR LOWER 55-56-57 CHEVY CONTROL ARMS
|
Item Number: CS-203
Personalization
* denotes required field
COTROL ARM TYPE*
|
|
SHOEBOX 'STUFF'
Now HEIDT'S has available for '55-'57 Chevys the same top quality steering, suspension, and brake components that have made HEIDT's the preferred brand for street rods.
|
TUBULAR UPPER & LOWER CONTROL ARMS
|
Upper A-Arms (Pair)
|
|
|
Lower A-Arms (Pair)
|
|
| TUBULAR UPPER A-ARMS
Tubular Upper A-Arms are the ultimate in looks. Direct replacement for stock upper A-arms, they include new design cross shafts which have offset built in to increase camber adjustability. All welds are heli-arc welded for maximum strength. Stainless arms are fully polished (except cross shafts). Arms are ready to install, including new cross shafts ball joints and bushings.
| PART #
|
OPTION
|
Add
|
| CA-201
|
Tubular Upper A-Arms, Plain
|
$319
|
| CA-201-SS
|
Tubular Upper A-Arms, Stainless
|
$449
|
| CA-203
|
Tubular Lower A-Arms, Plain
|
$519
|
| CA-203-SS
|
Tubular Lower A-Arms, Stainless
|
$749
|
| CA-201-6
|
Upper Arms 6 degrees Caster
|
$319
|
| CA-201-SS-6
|
Upper Arms Stainless 6 degree Caster
|
$449
|
|
TUBULAR LOWER A-ARMS
Our Lower A-Arms are a perfect match to our Upper A-Arms. The lower ball joint is the correct, compression type, not a tension ball joint turned upside down. Spring pocket is stamped. A-Arms include stabilizer tabs and steering stops welded in place. Also included are new cross shafts, ball joints and bushings and come fully assembled, ready to install.
| PART #
|
OPTION
|
Add
|
| CA-201-N
|
Narrowed Tubular Upper A-Arms, Plain
|
$319
|
| CA-201-SS-N
|
Narrowed Tubular Upper A-Arms, Stainless
|
$449
|
| CA-201-N-6
|
Upper Narrowed Arms 6 degree Caster
|
$319
|
| CA-201-SS-N-6
|
Upper Narrowed Arms Stainless 6 degrees Caster
|
$449
|
|
|
COIL-OVERS & LOWER ARMS
|
|
| Coil-Over Shocks, Pr.
|
Coil-Over Shock & Lower A-Arm
|
|
2" DROPPED STEEL SPINDLES
| 2" Dropped Steel Spindle
|
|
|
|
COIL-OVERS & LOWER ARMS
Coil-Over shocks have fully adjustable dampening, and assorted spring rates. Full length springs assure full travel and smooth ride. They also fit stock lower arms using adapter kit CS-020. Tubular lower A-Arms come fully assembled, and are available in either plain steel or fully polished stainless steel.
| PART #
|
OPTION
|
Add
|
| CA-203-M
|
Plain Tubular Lower C/O A-Arms
|
$519
|
| CA-203-SS-M
|
Stainless Steel Tubular Lower C/O A-Arms
|
$749
|
| CQ-001
|
QA1 Coil-Over Shocks w/Springs
|
$499
|
| CQ-350-11
|
Small Block Springs, 350#
|
|
| CQ-465-11
|
Big Block Springs, 465#
|
|
| CQ-010
|
Thrust Bearing Kit
|
$25
|
| TA-001
|
Spanner Wrench
|
$15
|
| CA-203-N-M
|
Narrowed Tubular Lower A-Arms, Plain
|
$519
|
| CA-203-SS-N-M
|
Narrowed Tubular Lower A-Arms, Stainless
|
$749
|
|
2" DROPPED STEEL SPINDLES
Our 2" Dropped Spindles are full steel spindles, just like factory spindles. This is much stronger than cast iron. They use your stock steering arms, with no loss of turning radius. No realignment required. The caliper brackets bolt on like mid-70's Chevys, allowing many brake options shown.
| PART #
|
OPTION
|
Add
|
| SP-102
|
Spindle Kit with Late GM Brackets
|
$289
|
| SP-102-B
|
Spindle Kit with Early GM Brackets
|
$299
|
|
|
Product Reviews
|
CHASSIS
|
|